Flite PHASER II Скачать руководство пользователя страница 4

The 

left

 pedal turns 

counter-clockwise and 

the 

right

 pedal turns 

clockwise.

      

      
      

Exclusively distributed throughout the UK by 

Moore Large & Co. L

TD

. For assistance, please contact our 

customer service professionals:                  

 

Grampian Buildings, Sinfin Lane IndustrialEstate,                  

 

Sinfin Lane, Derby DE24 9GL

 

01332 274200

 [email protected]

FL053T

Pedals

The final step is to attach the pedals.
Your pedals and cranks are specially designed so that 
they do not unscrew as you pedal.
It is very important that you follow these directions for 
correct attachment.
Failure to do so can strip the threads from your cranks. 
This may cause the rider to lose control of the bicycle 
and fall. Incorrect installation will invalidate your 
warranty.

The spindle of each pedal is marked with an ‘R’ or ‘L’ 
corresponding to right and left respectively: 
Imagine you are seated on the bicycle facing forward: the left pedal should go on the 
same side as your left foot, similarly for your right pedal and foot.

When attaching the pedals, be aware of the thread direction:
Always attach a pedal by rotating it towards the front wheel. Start by threading the 
pedal on with you hands. Once it is finger tight, tighten fully with a spanner.

Содержание PHASER II

Страница 1: ... are done correctly for the integral safety of the bike Please remove all packaging very carefully especially if using a knife or sharp blade Take care not to scratch any of the parts of the bike or slash the tyres We suggest that you keep hold of the carton in case you need to return the bike Getting Started Open the carton from the top and carefully remove the bicycle Take care not to scratch an...

Страница 2: ...e end of the stem into the front forks with the stem pointing forwards Use the provided hex wrench to tighten the stem bolt just enough to hold the stem in position Align the handlebarswith the fork legs ensure the minimum insertion mark is completely within the head tube and then fully tighten the stem bolt Front wheel installation Take the front wheel and loosen the wheel nuts off each end of th...

Страница 3: ...s without hinderance and is true Position the white front reflector to the right of the handlebar stem so that it points directly forwards and is within 5 degrees of the vertical Attach the bell in the same manner to the left of the handlebar stem Reflectors and bell Position the red rear reflector on the seat post so that it points directly backwards and is within 5 degrees of the vertical ...

Страница 4: ...you follow these directions for correct attachment Failure to do so can strip the threads from your cranks This may cause the rider to lose control of the bicycle and fall Incorrect installation will invalidate your warranty The spindle of each pedal is marked with an R or L corresponding to right and left respectively Imagine you are seated on the bicycle facing forward the left pedal should go o...

Отзывы: