8
VT8-600_1000-en-US_AA 10/18
4.2 Display Icon Descriptions
1.
Auto Range
2.
Data Hold
3.
Relative mode
4.
DC Zero
5.
Non-Contact Voltage detector
6.
Electrical signal detected
7.
Auto Power OFF (APO)
8.
Battery status
9.
Unit of measure and
measurement function icons
10.
Main display digits
11.
Minus (negative) sign
12.
DC (direct current)
13.
AC (alternating current)
Fig 4-2 METER DISPLAY
4.3 Push-Button Descriptions
MODE
: Short press to step through the functions shown in the table below.
Fig. 4-3 MODE Button Function Table
Switch Position
Mode Button Function
AC < > DC
AC < > DC
Ω > >
>
REL/ZERO
: Short press to enter/exit the Relative mode. Relative mode is only available for
AC/DC voltage, AC Current, and Capacitance. In DCA mode, short press to zero the display;
long press to exit the zero function.
H
: Data Hold (short press) and LCD backlight (long press for low intensity light, long press
again for high intensity light, long press again to switch lighting OFF). See the dedicated
paragraphs for Data Hold and Display Backlight in Section 5, Operation.
