FLIR VS80A4-60-2RM, Руководство пользователя

Страница: 4 / 12

Connect the Probe to the VS80
Carefully connect the probe to the VS80 monitor as detailed below.
Always switch the VS80 power off before connecting the probe.
1. Align the white dot on the probe connector with the white dot on
the VS80 monitor connector.
2. Plug the probe into the monitor unit, ensuring proper alignment
and full insertion.
3. Tighten the collar nut to secure the connection. Do not
overtighten.
Probe Controls
Articulation Joystick
Use the joystick (1) to move the probe neck in four directions as
shown in the illustration below. The thumb is typically used to move
the joystick while the hand grips the control unit. Set the control
unit’s stabilizing base on a firm platform for convenience.
Move the probe slowly and carefully; stop moving in a specific di-
rection if resistance is detected. Keep the probe as straight as pos-
sible and keep the probe neck at 0° articulation when moving into
and out of an inspection area.
#NAS100104; r. AB/83734/84877; en-US 3