FLIR VP50-2, Руководство пользователя

Страница: 15 / 22

Operation
6
3. Once powered, short press the power button to toggle the sensitivity
modes. The beeper will sound when the sensitivity is changed. See the
Low and High Sensitivity Modes section for additional information.
WARNING
Test on a known live circuit before testing on an uncertain circuit. Varying electrical
socket designs and insulation thickness/types can affect voltage detection
performance.
4. Hold the AC voltage sensor (1) very close to the voltage source.
5. If voltage is present, the meter vibrates, beeps, and the alarm indicator (3)
flashes.
• With voltage detected, in the normal (low sensitivity) mode, the alarm
indicator flashes red.
• With voltage detected, in high sensitivity mode, the alarm indicator
flashes amber.
6. To switch OFF, long press the power button. The meter beeps once and
the status indicator and tip lights switch off.
6.3 Flashlight
To turn the flashlight (9) on or off, long press the flashlight button (7), the me-
ter will beep. Note that the voltage detector does not operate while the flash-
light is ON.
6.4 Low Battery Indication
The status indicator (4) flashes amber when the batteries need replacing.
After 1 minute of flashing, the meter automatically switches OFF. See the
Maintenance section for battery replacement instructions.
6.5 Auto Power OFF (APO)
The meter switches OFF after 3 minutes of inactivity. The flashlight switches
OFF after 30 minutes, regardless of activity.
#NAS100038; r. AD/64642/64642; en-US 9