3 – Getting Started
10
May ’08
334-0001-00-10-LE, rev. 100
3 – Getting Started
The image is shaky.
Check your mounting. The PathFindIR LE does not incorporate image
stabilization and must be mounted soundly and securely.
Image is dim.
Check your monitor and video connections. It is recommended that you
use separate power supplies for the PathFindIR LE and the local display to
make sure you have clean uninterrupted power. Also, verify the PathFindIR
LE is connected to the 75 ohm input on the monitor. The image may be
dim if the camera is connected to an input that requires a different
impedance.
The image is dark and no objects are seen.
Recycle the power and see if you get the "Splash Screen" (as seen below)
on the display. If you get the Splash Screen but no image afterwards (only
a black screen), check to make sure that the window is clear of all
obstructions (refer to the maintenance section for information on window
cleaning). If you do not see the Splash Screen, check the power input and
video output.
If you see the Splash Screen but no image afterwards, it is possible the
mechanical shutter is stuck in the on position. Contact FLIR customer
service for additional help.
Figure 3-1: Startup Splash Screen
www.
.com
1.800.561.8187
