FLIR Si124, Руководство пользователя

Страница: 13 / 32

Getting started
7
Nominally the battery yields 7-8 hours of usage. Though the battery usage de-
pends on multiple variables which may decrease the usage time. These are
the cell temperatures, the load and the age (cycles) of the battery.
7.3 Startup
The camera will start automatically when the power supply is connected. The
camera will shut down automatically when the battery is disconnected.
If the battery is disconnected accidentally and immediately reconnected to
the camera the unit will reboot. When shutting the device down, it is recom-
mended to wait until the power LED is off before connecting the battery power
supply again.
1. Attach the battery cable to the battery. The connector of the battery cable
can be attached to the battery connector (1) only one way.
2. Attach the connector to the camera according to the following instructions,
with the orientation markings facing the same way:
Both the camera and the battery cable have red orientation markings . They
indicate the position of the key and the slot of the connectors which ensures
the proper connection orientation.
Hold the battery cable connector by the
locking ring and make sure that the orientation markings of both connectors
are aligned before inserting the battery cable. Then carefully insert the bat-
tery cable connector to the camera. The connectors should lock audibly.
#T810536; r. AB/63437/63437; en-US 10