FLIR Saros Скачать руководство пользователя

Страница: 36 / 39

427-0100-00-12 Version 100

December 2018

The information contained herein does not contain technology as defined by EAR,15 CFR772, is publicly available, and therefore not subject to EAR.

Configuration

Third-Party Certificates

Upload a public or private key provided by a third party, or upload a CA certificate.

TLS/HTTPS

Enable or disable camera control via Transport Layer Security (TLS) and secure HTTP (HTTPS).

3.2

Maintenance and Troubleshooting Tips

If help is needed during the installation process, contact the local FLIR representative, or visit the
FLIR Support Center at:

https://www.flir.com/support-center/support-hq/

. FLIR Systems, Inc. offers a

comprehensive selection of training courses to help get the best performance and value from the
thermal imaging camera.

Find out more at the FLIR training web page:

https://www.flir.com/support-center/training/

3.2.1

Cleaning

Great care should be used with your camera's optics. They are delicate and can be damaged by
improper cleaning. The Saros Dome camera lenses and windows are designed for a harsh outdoor

Содержание Saros








































Результаты поиска

Содержание Saros

Отзывы:

Похожие инструкции для Saros

Бренды по названию

Популярные бренды

FLIR Saros, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Saros

Отзывы:

Похожие инструкции для Saros

Бренды по названию

Популярные бренды