FLIR Raymarine Rotavecta Z195, Руководство по установке

Страница: 21 / 36

4.3 Rail mounting
Follow the steps below to mount your unit on a 23
mm (0.9 in.) or 25 mm (1 in.) diameter horizontal rail.
D13108-1
1. Pass the cable through the retaining ring and nut.
2. Fit the retaining ring to the base of the unit.
3. Secure the unit to the retaining ring using the nut.
4. Hold the rail clamp in position.
5. For rails with a diameter of less than 25 mm (1
in.) wedge the packing pieces on top of the rail
between the rail and the side of the rail clamp.
6. Align the screw holes in the seal with the 2 screw
holes in the rail clamp.
7. Place the seal on top of the rail clamp or packing
pieces, if used.
8. Position the Rotavecta on top of the seal so that
the retaining ring holes line up with the holes in
the seal and rail clamp.
9. Secure the unit to the rail using the screws
provided, ensuring that the cable feeds through
the retaining rings cable channel.
10. Ensuring that the body of the unit is pointing
straight up (vertical), tighten the grub screw
against the rail.
D13109-1
Rotavecta rail mount clamp
The rotavecta transducer can be rail mounted using
the supplied rail clamp.
D4834-2
1 1
2
3
3
5
6 7
4
1 Fixings x 2
2 Seal
3 Packing pieces x 2
4 Rail clamp
5
Grub screw
6 Rail diameter 23 mm (0.9 in) or more. If less
than 25 mm (1.0 in), use packing pieces
7
Rail diameter 25 mm (1.0 in). Do NOT use
packing pieces
Mounting
21