FLIR Raymarine E22158, Руководство по установке

Страница: 28 / 48

5.1 Mounting the unit
Before mounting the unit ensure that you have:
• Identified the routes that the cables will take.
D13372-1
1. Switch off the vessel’s power supply.
2. Check the selected location for the unit, a clear,
flat area is required, which is safe to have screws
fitted to.
3. Position the converter against the selected
location and mark the surface through the
converter’s mounting holes.
4. Using an appropriate size drill bit, drill 2 holes at
the marked locations.
5. Position the converter so that the mounting holes
of the unit line up with the drilled holes in the
mounting surface.
6. Use self tapping screws of a suitable size to
secure the converter to the mounting surface.
Do NOT overtighten the fixings.
7. Connect the SeaTalk ng backbone and spur
cables.
8. Connect the SeaTalk spur cable to the SeaTalk
spur connector.
9. Connect the supplied blank plugs to any unused
connectors.
10. Switch the vessel’s power supply back on and
check system.
28
SeaTalk – SeaTalkng converter