FLIR QUASAR CP-3211, Руководство пользователя и инструкция по установке, Страница: 48 / 164

September 12, 2016
40
Installation
CP-3211/CP-4221 User and Installation Guide
5.3.4.2 Corner Thin/Wide Box Mounting
The Corner thin/wide box mount must be used in conjunction with the standard or compact wall
mount.
Items needed:
§
Indoor pendant mount kit or outdoor mount kit (standard with outdoor cameras)
§
Standard/compact wall mount package (FLIR camera mounting option available
separately)
§ Corner thin/wide box mount package (FLIR camera mounting option available
separately)
§
Waterproof rubber screws and screw anchors for fixing the Corner thin/wide box (not
provided)
Wall box mounting package contents:
§
M8x16 screw x4
§
Spring washer 8 x4
§ Washer 8 x4
§ Sponge x2
Tools required:
§
Drill
§ Phillips and flat-head screw drivers
To install the standard/compact wall mount with corner thin/wide box mount
1. Cut a cable access hole in the wall.
2. Attach the corner thin/wide box to the wall using the appropriate screws and screw anchors
(not provided).
3. Thread the cables through the corner thin/wide box.
4. Attach the standard/compact wall mount to the corner thin/wide box using the supplied
screws and washers.
5. Thread the cables through the standard/compact wall mount with the cables coming out of the
pendant mount’s outlet. For outdoor cameras, attach the waterproof gasket to the pendant
mount.
6. After threading the cables, block the entry hole with the supplied sponge to prevent insects
from entering. See Standard or Compact Wall Mount , Step 3.
7. Thread the cables through the indoor or outdoor mount kit and attach the mount kit to the
standard/compact wall mount using the supplied screws and washers.
8. For outdoor cameras, adjust the waterproof gasket to the joint.
9. Connect the cables to the camera.
10. Secure the camera to the indoor or outdoor mount kit.