FLIR QUASAR CP-3211, Руководство пользователя и инструкция по установке, Страница: 30 / 164

September 12, 2016
22
Installation
CP-3211/CP-4221 User and Installation Guide
Tip:
A camera setup adapter, such as Veracity Pinpoint, can be used to connect a laptop
directly to the camera when using PoE.
5.3.2 Ceiling Mount
Ceiling mount methods include:
§ Hard Ceiling Mounting (indoor cameras only)
§ Recessed Mounting (indoor cameras only)
§ Indoor Pendant Mounting Kit (indoor cameras only)
§
Straight Tube Mounting (requires CD-HD-CAPX for indoor installation)
§ Swan Tube Mounting
5.3.2.1 Hard Ceiling Mounting (Indoor Cameras Only)
Hard ceiling mounting is the standard installation for a Quasar HD PTZ indoor camera and is supplied
in the standard indoor camera package.
Hard ceiling mount package contents:
§ Hard Ceiling Mount x1
§
M4 self-tapping screw x4
§ Plastic anchors x4
§ Fixing plate x1
§ M3 standard screw x4 (3 for fixing plate, 1 for Dome Cover*)
(*) For the Vandal Proof Camera Dome Cover, a security screw is supplied instead of the
standard screw.
Tools required:
§ Drill
§
Phillips and flat-head screwdrivers
To install the hard ceiling mount
1. If you have not already done so, remove the dome cover.
2. Use the hard ceiling mount as a template to mark the mounting surface where the three screw
holes will need to be drilled.
3. In the marked locations, drill each hole using a drill-bit of a slightly smaller diameter than the
supplied screw anchors and fully insert the anchors into drilled holes. You may need to tap
them flush with the wall using a finishing hammer.