FLIR QUASAR CP-3211, Руководство пользователя и инструкция по установке, Страница: 27 / 164

19
September 12, 2016
Installation
CP-3211/CP-4221 User and Installation Guide
5 Installation
Follow the instructions below for indoor and outdoor installation of the camera.
Related Links
·
Indoor Installation
·
Outdoor
Installation
·
Initial Camera
Configuration
·
Mounting Instructions
5.1
Indoor Installation
This section applies to the following cameras:
§ CP-3211-180
§
CP-4221-200
§
CP-4221-300-HPoE
Read the instructions provided in this chapter thoroughly before installing the camera. Following are
additional considerations for indoor installation:
· There must be a fuse or circuit breaker at the starting point of the electrical wiring infrastructure.
·
For indoor installations, such as industrial applications, the camera must be protected from hostile
external elements (e.g. corrosive environment, metallic dust, extreme temperatures, soot, over
spray, etc.).
· Do not place the camera on or near radiators and heat sources.
·
All electrical work must be performed in accordance with local regulatory requirements.
5.2
Outdoor Installation
This section applies to the following cameras:
§ CP-3211-181
§ CP-3211-181-HPoE
§
CP-4221-201
§ CP-4221-201-HPoE
§ CP-4221-301-HPoE
Read the instructions provided in this chapter thoroughly before installing the camera. Following are
additional considerations for outdoor installation
:
·
For outside wiring installation, always use weatherproof equipment, such as boxes, receptacles,
connectors, etc.
· For electrical wiring, use the properly rated sheathed cables for conditions to which the cable will
be exposed (for example, moisture, heat, UV, physical requirements, etc.).
·
Plan ahead to determine where to install infrastructure weatherproof equipment. Whenever
possible, ground components to an outdoor ground.
· Use best security practices to design and maintain secured camera access, communications
infrastructure, tamper-proof outdoor boxes, etc.
·
All electrical work must be performed in accordance with local regulatory requirements.