427-0011-00-10 Revision 140
Copyright © FLIR Systems, Inc.
41
MIL-C-26482 Series 1
Shell Size
18
Insert Arrangement
32
Finish
Olive drab chromate over cadmium
Contacts Pines
Shell Style
Cable plug
Insert Position
Keyring
Break-Out Connector Cable
The PTZ-35x140™ also includes a break-out cable that connects to the system interface cable
with single terminal connectors. The break-out cable has the MIL-C-26482 Series 1 Connector
on one end and 4 pig-tail connectors and power leads as follows:
Figure 8-5: Break-Out Connector Cable
1.
Four terminal ring leads for power: Input voltage range: 24 VDC ±10 % or 24 VAC ±10 %
rms (50/60Hz). Nominal static power consumption is <50W. For DC connections, the
red leads are positive and the black are common ground
2. One BNC video connector is used for both IR and DLTV video. Analog
video can be toggled using either the Pelco “D” commands or selected
using the FLIR Sensors Manager.
3. One RJ45 connector is for Ethernet communication and streaming MPEG4
video. The Ethernet connection for use with the Nexus provides both
communications and streaming video.
Two DB9 connectors are used for communication via RS-422 with the connector labeled “P3”
and the other is for maintenance labeled “P4”. The protocol on “P3” is 422/Pelco “D”.
