FLIR Photon Block 2, Руководство пользователя

Страница: 6 / 38

Photon User Guide 412-0035-00-10 Version 100
6
4 OPTIONAL PHOTON ACCESSORIES
•
Digital data serial-to-parallel module (parallel data cable sold separate)
•
Pleora IPort
•
Battery Pack
Figure 3: Some of the Photon Accessories
5 OVERVIEW OF THE PHOTON ELECTRICAL INTERFACE
Depending on connector type, either a 15-pin HD D-Sub or a 30-pin SAMTEC, thru which
input/output signals are available on the back of the Photon camera.
The 15-pin high density or HD D-Sub connector pin definitions are shown in Table 2. The
signals on this connector include input power, analog video output, serial communication
channel for command and control and the digital data output.
Table 1: 15-Pin HD D-Sub (F) Connector Pin Definitions
Pin # Signal Name Signal Definition
1 VIDEO_HI Analog Video, positive output
2 SD_ FSYNC+ Digital Port 1 Sync, positive output
3 GND Ground
4 GND Ground
5 GND Ground
6 VIDEO_LO Analog Video, negative output see
7 SD_ CLK+ Digital Port 1 Clock, positive output
8 SD_ DATA+ Digital Port 1 Output Data, positive output
9 TX Primary Serial Communication transmit
10 PWR_IN Input voltage
11 SD_CLK- Digital Port 1 Clock, negative output
12 SD_FSYNC- Digital Port 1 Sync, negative output
13 SD_DATA- Digital Port 1 Output Data, negative output
14 RX Primary Serial Communication receive
15 PWR_IN Input voltage
Figure 4: 15-pin HD D-Sub (M) connector on camera