background image

432-0010-00-10 Rev 100 — MD-Series Operator’s Manual 

29

 IP Communications

When the On-Screen Menu button is selected, the Toolbar changes to the 

following buttons to allow the user to navigate the menus. In the order they 

appear, the buttons are Left, Up, Right, Enter, Down, and Cancel.

Initially, the camera will not respond to any commands until the user takes control 

of the camera. A “Control” light in the lower left indicates if the user has control of 

the camera or not.

Clicking on the Control light or one of the buttons will send a control request to the 

camera. 

Multiple Control Devices

It is possible to have multiple devices that can control the camera on the network. 

If one device has control and a second device sends a control request to the 

camera, the first device receives the following message. 

If the control request is not declined within the allotted time, the other device will 

take control of the camera. The control light in the bottom left corner will change to 

yellow, indicating the device is connected, but not controlling the camera. 

Note:

Additional information about the web interface is available in the section 

titled “Advanced IP Communications” on page 31.

Control not lit, indicating no control yet

Control light indicates the PC has control of the camera

Содержание MD-Series

































































Отзывы: