MD-Series Reference
34
432-0010-00-12 Rev 100 — MD-Series Installation Guide
window requires further cleaning, use a soft moist cotton-based cloth with
isopropyl alcohol or dish soap.
Do not use abrasive materials, such as paper or scrub brushes as this will
possibly damage the lens by scratching it. Only wipe the lens clean when you
can visually see contamination on the surface.
Cleaning the Camera Body
Do not use a pressure washer to clean the camera, as that could force water
through the camera seals. Clean underneath the dome periodically to prevent the
accumulation of debris or salt.
If you have a problem with the thermal camera, do not attempt to repair it. The
MD-Series camera is a sealed unit and, apart from removing the dome, cannot
be opened or serviced in the field. Consult the installation dealer or FLIR
Systems Inc. for repair information.
Caution:
The MD-Series is designed with a removable dome, but the inner
camera is sealed at the factory against liquid water, suspended particulates, and
other contaminants. It is important that you not open the camera for any reason,
as it will compromise this seal and possibly damage the unit. Opening the
MD-Series camera will void the manufacturer’s warranty.
Cleaning the JCU
If you have installed an optional JCU, use a soft cloth and clean water to clean it.
Mild household cleaner such as Windex can also be used to remove tougher
stains or spots. Do not use alcohol based cleaners or any type of solvents as this
may discolor or damage the unit.
When the system is not in use, keep the JCU cover in place for additional
protection.
