FLIR Lorex LH070 Series, Инструкция по эксплуатации, Страница: 27 / 144

Setting the Date and Time 10
10.1 Configuring Daylight Savings Time (DST)
If your region observes Daylight Savings Time (DST), follow the instructions below to con-
figure your DVR to automatically update the time when the clock updates.
To enable automatic DST adjustments:
1. Click the DST Setup button.
2. Configure the following:
• DST : Select Enable .
• Time Offset : Select the number of hours the system should move forward or back-
ward when DST occurs.
• Daylight Saving Time Mode : Select Week or Everyday . This allows you to select
whether DST should begin and end at the beginning of the week or on a specific
date.
• Start Time and End Time : Enter when DST starts and ends.
3. Click Apply to save your settings.
10.2 Using a NTP Server to set your System Time
A NTP (Network Time Protocol) server syncs your system time with an online time server.
Lorex provides a free NTP service that allows your DVR to automatically update the time
for Daylight Savings Time.
NOTE
A constant Internet connection is required to use the NTP feature.
To enable NTP:
1. Right-click to open the Menu Bar and click the Main Menu button ( ).
#LX400080; r.40436/40436; en-US
19