FLIR IP Series, Инструкция по эксплуатации, Страница: 40 / 144

Setup 5
4. Press Start Record to start recording a pattern. Move the camera in the desired pat-
tern using the PTZ controls. When finished, press Stop Record .
5. Press the Start button to test the pattern, then Stop to stop the test.
5.3.5 Pan
Set the camera to pan continuously at a set speed.
To setup auto-pan:
1. Under PTZ > Function , click Pan .
2. Under Pan Speed , click - / + or use the slider to set the panning speed.
3. Press the Start button to test the auto-pan, then Stop to stop the test.
5.3.6 Privacy Mask
Configure privacy masks to hide certain parts of the camera image in video recordings.
CAUTION
Privacy masks block out parts of the camera image entirely and appear as black boxes in recordings.
To add a privacy mask:
1. Under PTZ > Function , click Privacy Mask .
2. Under SN , select a number for the privacy mask you wish to setup. You can configure
up to 24 privacy masks.
3. Check Enable .
4. Click Draw . Click-and-drag on the camera image to draw the privacy mask over the
area you wish to hide.
To remove a privacy mask:
1. Under SN , select the number of the privacy mask you wish to remove.
2. Uncheck Enable to disable the privacy mask, or press Clear to delete.
#LX400038; r. 1.0/18537/18537; en-US
32