FLIR FXV101-H, Инструкция по эксплуатации, Страница: 13 / 24

What are the parts of my FLIR FX camera?
DRAFT
4
4.5 Back
1. Direct mode LED : Indicates the camera is in Direct (AP) mode. When the camera is
in Direct mode, you can connect to the WiFi hotspot created by the camera to connect
to it in areas without access to wireless.
2. Cloud mode LED : Glows solid green to indicate the camera is connected to a WiFi
network, allows you to connect to the camera from anywhere. Flashing indicates the
camera is connecting to a WiFi network.
3. Temperature/humidity sensor (built-in) : Senses the temperature and humidity in
the room.
4. Accelerometer : Senses the motion of the camera.
4.6 Indoor Stand
1. Connect : Allows the stand to connect to the camera.
2. Ball joint : Provides the camera with a flexible range of motion.
3. Expanded battery : Provides extra battery life for the camera.
4. microUSB port : Connect a microUSB cable to the stand for charging the battery in
the camera and stand.
Note
While the camera is connected to a computer, you will not be able to connect to it on a mobile device.
Do not connect a USB cable to both the camera and stand at the same time.
5. Mounting plate : Enables the camera to be mounted to a wall. The mounting plate can
be removed from the camera. The camera comes with an additional mounting plate,
so you can keep a permanent mounting position while still having the ability to move
the camera around.
6. Device ID label : Contains the Device ID and QR code used for initial setup using the
mobile app.
#LX400034; r.16787/16787; en-US
7