FLIR
SCOUT III
U S E R M A N U A L
2.2 CHARGING THE SYSTEM
To assure proper charging, SCOUT III Series
monoculars should be turned OFF throughout
the charging cycle. Charging MUST only be done
when the camera temperature is from 0 to 40°C
(32 to 104°F), or battery damage may occur.
The monocular battery should be fully charged
prior to use. To charge the monocular, lift the
cover from the USB port, plug in the USB cable
provided with the monocular, and plug other
cable end into a USB power source.
• When charging the charging indicator will be
lit orange.
• When fully charged, the charging indicator
will light solid green. The initial charge time
is approximately 5 hours.
USB Port
Charging Indicator
2.3 BATTERY
Your Scout III Series monocular is equipped
with a sophisticated power system that uses a
rechargeable internal Li-Ion battery.
BATTERY STATUS INDICATOR
While the monocular
is ON, a battery status
indicator is always
shown in the corner
of the display image.
This indicator provides
an estimation of the
remaining battery
charge.
BATTERY SAFETY INFORMATION
The SCOUT III Series monocular is a sealed unit
with sensitive electronics and contains no user-
serviceable parts. Service or repair
is to be performed only by the manufacturer. The
monocular must never be opened or modified
by the user. The monocular contains no user
serviceable components. The battery used in
this device may present a risk of fire or chemical
burn if mistreated. Do not disassemble the
monocular, store above 60°C, or incinerate. The
battery is replaceable only in the factory. Return
the product to the manufacturer for
battery replacement.
Full Charge
Half Charge
Plugged In
