Operating the Fido X4
5.5.2 Sample information: threat detected
If a threat is detected, the sample information screen will resemble Figure 5-27.
Figure 5-27
: Sample information screen: Threat detected
Information type
Comments
1
Sensing Element type
2
Unique file number
3
Alarm strength
Alarm strength is described by red triangles on a scale of 1
to 4 triangles, indicating the relative magnitude of the
response, or quantity of the threat material collected (1=
lowest, 4=highest).
4
Commands
• Select
Data
to view the raw sensor array data in the
form of a spectrogram. See 5.5.3.
• Select
OK
to return to the analysis result screen.
• Select
Flag
to flag the sample record. See 5.5.4.
• Select
ID
for more information on the threat.
See 5.5.5.
5
Current Sensitivity setting
6
Type of threat found
The presumptive threat identification displayed may be at a
general threat/ no threat level, threat material class, or at a
specific substance level.
Depending on the amount that was available for analysis
and other factors, this presumptive threat identification may
indicate only that a threat is present, the threat material
class, or a specific substance.
7
Sensitivity setting when
sample was taken
44
4226044 (Rev. C) © 2020 FLIR Systems, Inc.