FLIR Extech Instruments MA410 Скачать руководство пользователя страница 9

MA410  V2.2  08/08 

Maintenance 

WARNING: 

To avoid electrical shock, disconnect the meter from any circuit, remove the 

test leads from the input terminals, and turn OFF the meter before opening the case. Do 
not operate the meter with an open case. 

Cleaning and Storage 

Periodically wipe the case with a damp cloth and mild detergent; do not use abrasives or  
solvents. If the meter is not to be used for 60 days or more, remove the battery and store it 
separately. 

Battery Replacement 

1. 

Remove the 2 Phillips head screws that secures the rear battery cover 

2. 

Open the battery compartment 

3. 

Replace the 2 AAA batteries. 

4. 

Secure the battery compartment door 

Calibration and Repair Services 

Extech offers repair and calibration services

 for the products we sell. Extech also 

provides NIST certification for most products. Call the Customer Care Department for 
information on calibration services available for this product. Extech recommends that 
annual calibrations be performed to verify meter performance and accuracy. 

Warranty 

EXTECH INSTRUMENTS CORPORATION (A FLIR COMPANY) warrants this instrument to be 
free of defects in parts and workmanship for one year from date of shipment (a six month limited 
warranty applies to sensors and cables). If it should become necessary to return the instrument for 
service during or beyond the warranty period, contact the Customer Service Department at (781) 
890-7440 ext. 210 for authorization or visit our website www.extech.com for contact information. A 
Return Authorization (RA) number must be issued before any product is returned to Extech. The 
sender is responsible for shipping charges, freight, insurance and proper packaging to prevent 
damage in transit. This warranty does not apply to defects resulting from action of the user such as 
misuse, improper wiring, operation outside of specification, improper maintenance or repair, or 
unauthorized modification. Extech specifically disclaims any implied warranties or merchantability 
or fitness for a specific purpose and will not be liable for any direct, indirect, incidental or 
consequential damages. Extech's total liability is limited to repair or replacement of the product. 
The warranty set forth above is inclusive and no other warranty, whether written or oral, is 
expressed or implied. 

 

 
 

Содержание Extech Instruments MA410













Отзывы: