FLIR E75, Руководство пользователя

Страница: 114 / 300

Configuring Wi-Fi
23
23.1 General
Depending on your camera configuration, you can connect the camera to a wireless local
area network (WLAN) using Wi-Fi, or let the camera provide Wi-Fi access to other devices.
You can connect the camera in two different ways:
• Most common use : Setting up the camera as a wireless access point. This method is
primarily used with other devices, e.g., an iPhone or iPad.
• Less common use : Connecting the camera to a wireless local area network (WLAN).
The Wi-Fi functionality is managed from the Settings menu. You can also enable/disable
Wi-Fi on the swipe-down menu. For more information, see section 9.4 Swipe-down menu ,
page 24.
23.2 Setting up a wireless access point (most
common use)
Follow this procedure:
1. Push the navigation pad to display the menu system.
2. Select ( Settings ) and push the navigation pad. This displays the Settings menu.
3. Use the navigation pad to select Connections > Wi-Fi .
4. Select Share and push the navigation pad.
5. (Optional step.) To display and change the parameters, select Share settings and push
the navigation pad.
• To change the SSID, select Network name (SSID) and push the navigation pad.
• To change the WPA2 password, select Password and push the navigation pad.
Note These parameters are set for your camera’s network. They will be used by the
external device to connect that device to the network.
23.3 Connecting the camera to a WLAN (less
common use)
Follow this procedure:
1. Push the navigation pad to display the menu system.
2. Select ( Settings ) and push the navigation pad. This displays the Settings menu.
3. Use the navigation pad to select Connections > Wi-Fi .
4. Select Connect to network and push the navigation pad.
5. To display a list of the available networks, select Available networks and push the navi-
gation pad.
6. Select one of the available networks and push the navigation pad.
Note Password-protected networks are indicated with a padlock icon, and for these
you will need to enter a password the first time you connect to the network. After that
the camera will connect automatically to the network. To disable the automatic connec-
tion, select
Forget network .
Note Some networks do not broadcast their existence. They appear in the list as Unti-
tled . To connect to such a network, you will be prompted to enter additional parameters.
#T810190; r. AJ/46209/46209; en-US
102