FLIR DPB24TLX, Инструкция по эксплуатации

Страница: 33 / 36

25
Troubleshooting
6. TROUBLESHOOTING
Follow the steps below if you are experiencing trouble with your camera.
Contact Digimerge Technical Support if the issue persists.
Nothing appears on the screen:
• Check that the power cable is connected properly and that the voltage is
correct.
• Check that you have properly connected VIDEO cable to the camera VIDEO
output jack and to the monitor/DVR.
The image on the screen is unclear:
• Is the lens stained with dirt? Clean the lens with a soft, clean cloth.
• Re-position the camera if necessary.
• Adjust the Zoom and Focus screws as needed.
The image on the screen is dark:
• If you have an intermediate device, set the impedance to 75Ω / Hi-z.
• Adjust the monitor contrast & brightness controls.
Image quality is poor:
• Return the camera OSD to factory default settings (Middle
button>OTHERS>CAMERA RESET).
• Verify that the camera is receiving sufficient power.
There is interference in the image.
• The camera or the cables may be close to a source of high voltage, such
as a generator. Re-position the camera if necessary.