FLIR D-313, Руководство по установке

Страница: 14 / 42

427-9030-01-12 Version 140 March 2018 14
2 Basic Operation and Configuration
2.2.1 Set IP Address using the FLIR Discovery Network Assistant (DNA)
The D-Series camera is shipped with a static IP address: 192.168.250.116. Assuming the existing
network uses IP addresses that are unique and different than the default address on the camera,
configuring the camera for IP communications generally involves the following steps:
Step 1 Connect the Ethernet port of the camera to the existing IP camera network.
Step 2 Connect a PC or laptop to the same network.
Step 3 From the PC connected to the camera network, use the DNA utility to discover and display
the camera’s current IP address.
a Download the DNA utility.
b Unzip the utility, then double-click to run the executable file (
DNA.exe ). All the units on
the VLAN are discovered.
c For additional instructions on using DNA, refer to the DNA User’s Manual available in the
Help ( ) link while the software is running.
Step 4
Select Assign IP to change the IP
address or to set IP addressing to DHCP.
Step 5 Double-click the camera in DNA’s
Discovery List to open the camera’s web
server Login page in Internet Explorer or
point your web browser to the camera’s IP
address.
Step 6 Using a web browser, configure the camera
settings, such as camera date/time, and
other parameters, so the camera is
compatible with the existing network.
Online manual
Select a filter
Click to sort
Select Assign IP
Right-click