14
FLIR
BREACH
U S E R M A N U A L
4.4 RECORDING MENU
The RECORDING menu allows the operator to delete selected image
and video files stored in the camera.
VIDEO RECORD
> EXIT
FILE
<> No Files
DELETE
4.5 SETTINGS MENU
The SETTINGS menu allows you to make compass calibration, to
change the position of image on the screen, pair a new remote with
the camera, as well as to restore the settings to their factory defaults.
The Firmware (FW) revision number is listed at the bottom of the menu
display.
SETTINGS
> EXIT
CAL. COMPASS
LEFT MARGIN <> 0
TOP MARGIN <> 0
LEARN REMOTE
FACTORY RESET
FW:
xxxxxxxxxxxx
CALIBRATE COMPASS
Select to calibrate the compass. When selected, rotate the camera in
all directions for best calibration results.
LEFT MARGIN
Shifts the screen left to right.
TOP MARGIN
Shifts the screen up and down.
LEARN REMOTE
Learns the remote channel and encryption. Select this to pair a new
remote with the camera. When pushed, the phrase PUSH ANY REMOTE
KEY will appear. Push any button on the remote. When calibration is
successful, the phrase LEARN SUCCESSFUL will appear.
NOTE:
Remote may not be available in every country
FACTORY RESET
Resets the camera to factory defaults.
FW:
Displays the System software version and the thermal camera software
version.
4.6 POWER DOWN MENU
Select POWER DOWN item of Main Menu and then push
●
button to
turn monocular off. Or hold down
●
button for more than 8 seconds.
