FLIR Ariel Gen III CM-3304-11-I, Руководство пользователя и инструкция по установке

Страница: 47 / 128

41 September 4, 2017
Configuration and Operation
CM-3304/CM-3308 User and Installation Guide
9.3.1.2 Basic Configuration
The Basic Configuration tab includes the following screens:
Date & Time Audio Firmware Basic Operations OSD
9.3.1.2.1 Date & Time
The current time is displayed in the Current Camera Time text box. To set the date and time, click Basic
Configuration > Date & Time . The Date & Time screen is displayed.
Date & Time Screen
To change the date and time
1. Select one of the following options
·
Manual Settings – Enter the date and time in the respective field.
·
Synchronize with PC – Enter the date and time in the respective field.
·
Synchronize with NTP Server – Selecting this option opens the NTP Settings section:
NTP Setting Section
a. Enter the following details in the NTP Setting section:
·
Enable – From the drop-down list, select Manual to set the NTP server manually,
or From DHCP Server to set the time according to the network DHCP server.
·
Server Address – Enter the IP address for the NTP server.
·
Synchronization Period – Select a number between 1-24 for the frequency (in
number of hours) that the camera will synchronize with the NTP time server (i.e.,
every one hour, every two hours, etc.).
2. In the Time Zone Setting section, from the Area drop-down list, select your local time zone.
3. Click Save . The new time is displayed in the Current Camera Time text box.