FLIR 72501-0101 страница 115 Скачать руководство пользователя

Страница: 115 / 146

25.1

General

You can use the camera with the following Bluetooth devices:

• METERLiNK devices (FLIR meters).
• Bluetooth-enabled headsets.

Before you can use a Bluetooth device with the camera, you need to pair the devices.
The Bluetooth functionality is managed from the

Settings

menu. You can also enable/dis-

able Bluetooth on the swipe-down menu. For more information, see section 11.4

Swipe-

down menu

, page 28.

25.2

Procedure

Follow this procedure:

1. Push the joystick to display the menu system.

2. Select

(

Settings

) and push the joystick. This displays the

Settings

menu.

3. Use the joystick to select

Connections

Bluetooth

4. If the

Bluetooth

check box is unchecked, push the joystick to enable Bluetooth.

Note

You also need to ensure that the external Bluetooth device is in visible mode.

5. Select

Available devices

and push the joystick.

6. Wait until a list of available devices is displayed. This will take about 15 seconds.
7. When a Bluetooth device is found, select the device to add it, and begin the pairing

procedure. The device is then ready to be used.

Note

• Only METERLiNK devices (FLIR meters) and Bluetooth-enabled headsets will appear

in the list of available devices.

• You can add several devices.
• You can remove a device by selecting the device and then selecting

Unpair device

• After adding a METERLiNK device, such as the FLIR MR77 or FLIR DM93, the result

from the meter will be visible in the result table and stored with the images. For more
information, see section 27

Fetching data from external FLIR meters

, page 103.

• After adding a Bluetooth-enabled headset, it is ready to be used for adding voice an-

notations. Adding a Bluetooth-enabled headset automatically disables the built-in mi-
crophone and speaker.

#T559954; r. AT/65353/65353; en-US

101

Содержание 72501-0101



















































































































































Результаты поиска

Содержание 72501-0101

Отзывы:

Похожие инструкции для 72501-0101

Бренды по названию

Популярные бренды

FLIR 72501-0101, Руководство пользователя

Результаты поиска

Содержание 72501-0101

Отзывы:

Похожие инструкции для 72501-0101

Бренды по названию

Популярные бренды