FLIR 614004898, Руководство оператора

Страница: 27 / 78

Explanation Label
■
NUC / AF = When pressing the NUC button for
less than 1 second, the camera performs an
image calibration. When pressing and holding
the NUC button for more than 1 second, the
camera performs an auto-focus sequence. This
is the default detting.
■
AF / NUC = When pressing the NUC button for
less than 1 second, the camera performs an
auto-focus sequence. When pressing and
holding the NUC button for more than 1 second,
the camera performs an image calibration.
Nuc button
8.2.4.1.2 When TV is selected
10059003;a1
Figure 8.5 Setup – Image dialog box
Explanation Label
SEE: See section 8.2.3.2.5 – Backlight on/Backlight
off on page 19.
Back light comp
The Image effect feature allows the operator to
select between:
■
Off
■
B/W
Selecting Off puts the TV imager in color mode,
while selecting B/W puts it in black & white mode.
Image effect
This function offers increased sensitivity to IR radi-
ation by removing a built-in cut-off IR radiation filter.
The feature is especially valuable under twilight
conditions.
NOTE: The normal position of the cut-off filter is
in the raypath of the TV imager.
Near IR sensitive
8.2.4.2 Symbology
From the Setup – Symbology dialog box the operator defines how the overlaid sym-
bology is displayed.
Publ. No. 1 557 544 Rev. a121 – ENGLISH (EN) – October 6, 2005
21
8.2 – On-screen menus