FLIR 614004898, Руководство оператора

Страница: 25 / 78

SEE: For information, see section 8.2.3.1.1 – Declutter on page 17.
8.2.3.2.2 Auto focus
Choosing this function executes a momentary auto-focus adjustment. Due to the risk
of mechanical wear, continuous auto-focus is not provided.
8.2.3.2.3 Change FoV
This is the same function as when IR is selected.
8.2.3.2.4 Freeze/Live
This is the same function as when IR is selected.
SEE: For information, see section 8.2.3.1.4 – Freeze/Live on page 17.
8.2.3.2.5 Backlight on/Backlight off
This function offers a backlight compensation. If an object appears in front of a very
light background – or if the object is very dark – selecting this function increases the
image quality. There are two choices –
Backlight on and Backlight off .
8.2.3.2.6 Power off/Power on
This function switches the TV camera off, which will turn the image black. When the
TV is switched off, all menu items except
Power On in the Image menu are gray and
can not be selected.
8.2.3.2.7 Slave mode on/Slave mode off
When Slave mode on is selected, and the operator switches to IR mode, 5° field of
view will be used for IR mode if the current TV field of view is less than 15°. If not, 20°
field of view for IR mode will be used.
The camera will also carry out an autofocus sequence.
8.2.4 Setup menu
10343103;a1
Figure 8.3 Setup menu
The Setup menu is used to define system constants and symbology. The up/down
arrow buttons are used to move between the different dialog box selections, and the
Publ. No. 1 557 544 Rev. a121 – ENGLISH (EN) – October 6, 2005
19
8.2 – On-screen menus