Flipper Instructions
A22v2.NA & EU
(North America & EU)
4
Adding Channels
Make a list of channels you want to save. Channels work in the order entered. For
instance, if you enter 2, 5, 1, and 8, Favorites scroll through in that order.
Channel Format
STBs use a three or four digit channel entry system. Enter channels as you normally
would for your STB.
The instructions below assume you receive channels through an STB box (cable / satellite).
If using Flipper as TV only, use the
TV
button instead of
STB
.
1.
Press and hold
STB
and
ADD
at the same time until the light turns solid.
2.
Enter the first channel followed by the
ADD
button, then enter the next channel
followed by the
ADD
button, then enter the next channel, etc.
Example:
7-
ADD
; 4-4-
ADD;
1-1-0-
ADD;
for channels 7, 44, 110.
Options:
“Enter” button: Some STBs may chance channels faster by using an “Enter” button.
In Flipper, the STB Enter function is stored in
Mute.
(Flipper does not have
“enter” for TVs). The only way to know if this is working for your device is trial
and error.
Example:
7-
Mute
(Enter)-
ADD
; 4-4-
Mute
-
ADD
; 4-0-2-
Mute
-
ADD
, for channels
7,44, 402.
0’s as placeholders: If your STB does not use an Enter button, then 0’s may be
used as placeholders. For example:
0-7-ADD; 0-4-4-ADD; 1-1-0-ADD, 0418 for
channels 7, 44, 110, 418.
3.
Once Favorites are programmed, press and release the
STB
button to exit.
4.
Test by scrolling through the list with the
Channel Up/Down
. You may need to scroll
through twice for all Favorites to appear.
5.
To add additional channels at any time, repeat these instructions.
6.
Press and release
ADD
once to enter Dual Mode
Note:
You may wish to try 5 channels at first, then test, to make sure the format is
correct.
Deleting Channels:
To delete channels from your Favorites, press and hold the
STB
(or TV) and
DEL
at the
same time until the light turns solid, then enter the channel you want to delete, followed by
DEL
. For example: 4-4-
DEL
to delete channel 44.
