CANDLE SET UP/CHOOSING A LOCATION
After activating your candle per above instruction, place it on a flat surface either indoors or outdoors.
Your candle is made of resin and is all weather; it can be exposed to normal weather conditions. If using
outdoors or in a location that might be exposed to precipitation, the Scan Window MUST be covered to
prevent water from entering it.
A clear cylindrical silicone cover is provided to protect the Scan Window if used outdoors. Activate your
candle and choose your color per the instructions above. Take the silicone cover and carefully pull it over
the bottom of the candle. Slowly pull the edge up evenly and tightly around the candle to ensure it fits
securely.
CAUTION:
In rare cases,
installing the latex cap may accidently activate the Scan Push Button. If this
should happen, remove the cap and choose your illuminating color again. You WILL NOT need to reset
the timer to do this; simply place the Scan Window over the color you would like to reproduce and press
the Scan Push Button. Slowly and carefully install the latex cap again.
CANDLE LIGHT MAINTENANCE
To clean the candle wipe with a clean damp non-abrasive cloth.
NEVER
clean with detergent, bleach or
other harsh chemicals; doing so will damage the surfaces of the candle.
BATTERY LIFE
After extended use your candle will remain illuminated but you may be unable to scan a new color. If
this should occur, and you wish to change the color, please install new batteries. In addition, if your
candle should begin to flash or become dim repeatedly you should also install new batteries.
WARNING:
1. This product is a flameless candle, to avoid fire hazard, do not light wick with fire.
2 Failure to insert batteries in the correct polarity, as indicated in the battery compartment, may shorten
the life of the batteries or cause batteries to leak.
3. Do not mix old and new batteries.
4. For best results, use alkaline batteries.
5. Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel Metal
Hydride) batteries.
6. Do not dispose of batteries in fire.
7. Batteries should be recycled or disposed of as per manufacturer’s recommendations.
BATTERIES NOT INCLUDED
CUSTOMER SERVICE
For questions or support, please call (815) 223-9942 or e-mail [email protected].
Manufactured by FLIPO GROUP LIMITED La Salle, IL 61301 USA
