10
© 2008 CBT Supply Inc.
Install using 2 Phillips head 5/8” wood screws.
DO NOT install with One Way screws at this time. If you find that
you need to relocate this bracket, One Way screws will do their
job too well. Install only this bracket at the “bone” end of the bar.
You will fine tune the location of the lock end of the system next.
Find the ideal location for the
lock end of the system by using
the key and rotating the lock
open and closed.
Nudge the location of the
bracket around until you find the
spot where the lock operates
smoothly.
Hold the bracket in position and mark the location for drilling
pilot holes. Drill precise pilot holes using 1/8” drill and depth
gauge. Install using 2 Phillips 5/8” wood screws.