FAA-26, Technical Manual, Rev. 1.2.0, December 2020
Page
9
of
14
4.3 Analogue Output Connection
Only one
of the analogue output types can be used at the same time and must be
selected in the setup. Install the analogue output measuring instrument for
adjustment if needed.
Pin Name
Definition
I
Current Output
V
Voltage Output
G
GND
Shield
Current output connection
Voltage output connection
4.4 Changing of the Analogue Output Type
FAA-26 checks the T and R pins connection and sets its analogue output according
to the table below at power on. To change the analogue output mode short circuit or
open circuit T and R pins of the instrument before power on the instrument.
Analogue Output Type
T and R pins
V/I LED
Current output
Open circuited
On
Voltage output
Short circuited
Flash
