Note:
During phone calls two earbuds work, and on both sides you can control Power
off/Play/Pause individually during the connection. The other earpiece is then
synchronized. The memory function is automatically supported when
reconnecting both devices (both earbuds and the device) that were used last
time!
Bluetooth use:
1.Making phone calls:
Make sure the earbuds are connected to your mobile device. You can call now.
With phone calls, 1 or 2 of the earbuds works. You will hear the telephone number
when you receive a call.
You answer the call by pressing the right or left touch button once. To reject the
call, press 2x quickly the right or the left touch button so the call is rejected. When
the earbuds are in music or standby mode, you can call the last telephone
number again by pressing the right touch button 3x quickly. You can change the
volume by pressing the touch button 2x shortly on the right headset for
and 2x shortly on the left touch button headset for volume
–
or change it by the
volume buttons from your device directly.
For Apple users that use SIRI: 3x quickly press on the left multifunction button
headset to activate it.
2.Listen to your music
Make sure that the earbuds are connected to your mobile device. You can now
listen to the music on your playlist. 1x short press the touch button to stop the
music. Press the button again to continue. Long press the right touch button till the
beep is heard for the next song and long press the left touch button till the beep is
heard for the previous song.
3.Power off
Hold down the touch button until the LED light shows red. The Bluetooth device
switches off, even when the earbuds are both connected as a set. If the earbuds
have been removed from your Bluetooth device for more than 5 minutes, they will
switch off automatically. You do not have to worry about empty battery.
