FlightScope X3 Скачать руководство пользователя страница 4

Страница: 4 / 56

Increase the separation between the equipment causing and experiencing the inter-

ference. Install a radio frequency shield between the equipment causing and experi-

encing the interference. Consult your dealer for help.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including

interference that may cause undesired operation.

IC Statement

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including interference

that may cause undesired operation of the device.

Déclaration IC

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux

appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions

suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de

l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est

susceptible d'en compromettre le fonctionnement.

Содержание X3

























































Результаты поиска

Содержание X3

Отзывы:

Бренды по названию

Популярные бренды

FlightScope X3, Руководство пользователя

Результаты поиска

Содержание X3

Отзывы:

Бренды по названию

Популярные бренды