Flightline FLW204, Руководство пользователя

Страница: 12 / 13

H1
11
Item No.: FLW204
Focke
-
Wulf Fw 190 A8
H1
/
H2 12mm
/
12mm
H1
/
H2 12mm
/
12mm
H1
/
H2 7mm
/
7mm
H1
/
H2 17mm
/
17mm
H1
/
H2 12mm
/
12mm
H1 28mm
H1 15mm
H1
/
H2 18mm
/
18mm
Aileron
Elevator Rudder Flaps
Low Rate
High Rate
D
/
R Rate
：
100
%
D
/
R Rate
：
100
%
D
/
R Rate
：
100
%
D
/
R Rate
：
60
%
D
/
R Rate
：
75
%
D
/
R Rate
：
60
%
Install the loose-leaf
The surface control use no-hinge connection design, although after a lot of use, has proved to be a reliable design.
However, we don't exclude, in the use process, due to the errors, and cause the control surface fall off.
Step one
Use knife to cut the
surface control
Select the appropriate location,
cook mark. Make sure the three
points in the middle position.
Step two
As the right photo shown, choose
two or three position, attach the
glue on the long end of loose-leaf,
and insert to the three positions.
Step three
As the right photo shown,
repeat the "step two", attach
the control surface to the
loose-leaf.
H1
H2
H1
H2
H1
H2
According to our test experience,refer to the following data to control kinds of control surface,we consider its helpful
for flight.In the low rate,the plane can be controlled softer, suit for some players who lack of flight experience. And in
high rate,the plane can be controller more sensitive,suit for more experience players.We advise you use the big rate
in the first flight,and according to your own demanding to choose one rate for flight.