• Insert the larger plug into the jack marked “headphone” or “phone”.
• Insert the smaller plug into the jack marked “microphone” or “mic”.
• Insert 9V battery (included) into the battery compartment.
• Set the stereo/mono switch located beside the belt clip on the battery
pack
to “M” position. If connecting to a stereo intercom, set the switch to the
“S” position.
To activate the ANR, locate the switch at the top of the battery
compartment and select “I” for “on”. A Flashing green LED will indicate it is
Special placement of speakers and microphone within the ear-
dome allow the ANR technology to sample a selection of sounds
that pose some risk for hearing damage, and create an equal
but opposite sound to cancel the noise before it enters your ear.
• The mic boom should always be worn from the left side.
• To
increase
the
size
of
the
head-
set,
slide
the
domes
in
a
downward
direction. To decrease, slide the domes in an upward direc-
tion.
• Properly
fitting
the
headset
to
each
wearer’s head is crucial to performance. The headpad
should fit comfortably on top of the head, without a gap
or space between the head and headpad. The headset
should be centered on the head, and the ear seals should
comfortably cover the ears, without being placed too far for-
ward on the jawbone or face. Place the mic no more than
1/8” from the lips to ensure clarity and peak performance
of the noise canceling mic.
• A volume control is provided for each ear dome.
A N R T E C H N O L O G Y
I N S T A L L A T I O N
F I T T I N G I N S T R U C T I O N S
Содержание Classic ANR
Страница 1: ...CLASSIC ANR U S E R S G U I D E ...
