●
Ensure the servo doesn't bind
at center or at either end point.
Drill holes in the hardwood tail
wheel mount and install the blind
nut through the opening in the
rear of the fuse.
Install the mounting screw for the
tail wheel.
●
Ensure it has been totally
screwed into the blind nuts.
Install the hatch over the opening in the rear of the stabilizer with 4 screws.
Mount the elevator onto the stab
making sure you use Vaseline in
the hinge points so the glue will
not stick the hinge shut.
Install the control horns in place
for the elevator horn before sliding
the stab in place.
Screw the threaded pushrod and
swivel in place onto the elevator
horn.Plug in a 24"servo wire
extension and use a securing clip
provided to make sure they don't
come unplugged in flight.
STABILIZER AND ELEVATOR
Aluminum
steering peg
P.5
