Flight Model F124 MXS-R 30-35CC, Инструкция по сборке

Страница: 5 / 12

Install the aileron horns in place
with AB glue.Align the holes in the
horns .Install the servo after
pulling the servo extention wire
in the wing.Install the servo arm
on the servo and loctitle it in place
on the mount screw.Install the
pushrod and control horn.
●
Check for movement and center
on the servo for the aileron to be
in a level resting position.
●
Check to make sure you have
the servos in a reverse manner
so ailerons with work properly.
Find out the holes in each sides
of fuselage,then remove the
covering.Insert the carbon joiner
in place,then put on wings.
●
Check to make sure you have
the carbon in a right length in the
wings.
MAIN WINGS
AB
AB
P.5