Flight Model F-4U Corsair 100CC, Инструкция по сборке

Страница: 4 / 26

Sheet1
Drill a 3mm hole at the bottom of fin base for the
Rudder control wire install as show.
Install the Rudder to the Fin and glue all hinges with
Epoxy as show.
Notice: some version of this model we will use flat
hinges.
And must let 1mm grip on the Fin top with Rudder.
Install the Rudder control wire and control arm also
push rod as show.
Install the Rudder control servo as show.
Notice: this servo need minimum 10kg torque.
Unless it can be fail to control or cause flutter
problem.
Page 4