When stabilizer is centered and aligned, drip Thin CA glue onto the stab-to-fuselage joint top and bottom. NOTE: We
do not remove any covering form the horizontal stabilizer. This keeps the stabilizer strong, and thin CA makes an
excellent joint to covering material. If your stab joint is not tight enough for thin CA glue, or if you have to trim the
opening to align the stab, you can use thick CA glue as well.
Install the elevator half with the fiberglass joiner rod onto the stabilizer. Makes sure it flexes easily at least 45
degrees up and 45 degrees down. Apply thin CA glue to the hinges, 2 large drops on each.
