FD151CV-LP
7
Revision D, November 2008
Operation Instructions
The FD151CV-LP is continuously on but can be de-energized by removing
power from the entertainment system. No pilot or aircrew action is necessary
during flight or ground operation.
The passengers will be able to change the video output from the FD151CV-LP
using the video source select button on the display, or remotely throughout the
cabin with the included IR remote. Point the IR remote at the top of the LCD to
make changes.
When applying 28VDC power, the display will turn on and look for a valid input
on the last known source. If no input is found, the display will go to standby
mode. Pressing the Select button will select new video input.
Button Controls
Located on the bottom of the FD151CV-LP are 5 buttons.
From right to left (fan inwards), the functions are as follows:
BUTTON
DESCRIPTION
POWER Pressing will turn the monitor ON or OFF from Standby
mode.
SOURCE Select video source with the following order: Composite
1, Composite 2 and RGB (PC).
UP
Press while in menu- Adjust selection UP.
Press out of menu - Brightness (Use up or down to
change.)
DOWN
Press while in menu- Adjust selection DOWN.
Press out of menu – Contrast (Use up or down to
change.)
MENU
Opens the menu, changes between selections.
All manuals and user guides at all-guides.com