4
Clave 23+ Instruction Manual v1.4
Clave 23 + Quick Guide
Set the Time and Date
1.
Power on, wait, and then press Select. Press the Down button and highlight ‘Basic Set’.
Enter ‘Basic Set’ by pressing Select.
2.
Select item to change by pressing Select.
3.
Adjust numbers by pressing Up and Down buttons. The time is a 24 hr. Clock.
4.
Press Select at the last number to save and exit that menu. The Counter cannot be
changed in this screen.
5.
Power off.
Retrieve Record on USB Stick
1.
Power on, wait, and then press Select. Press Down button and highlight ‘Report’. Enter
‘Report’ by pressing Select. A list of the last 20 cycles will be accessible. Insert a USB
stick correctly into the USB connector.
2.
Use the Up and Down keys to highlight the record you want. Press Select. If a printer is
connected, it will also print a copy of that report. Wait at least 10 seconds for the report to
be transferred to the USB stick. Repeat the procedure (highlight and select) for any other
records to be transferred to the USB stick.
Checking Maintenance Screen
1.
Hold the Up and Down buttons while powering on. Let go when you enter the interface.
Scroll to ‘Maintenance’ and highlight it. Press Select button. On a new install, use the
select button to change the ‘End’ date to 1 yr in the future. Change the cycle count to the
expected cycle count for a year or 1000. Use the up/down buttons to change the values.
When finished, press the select button and power off. E88 or ‘wrench’ icon will come up
when either value is reached. Don’t make changes on a unit already in use for a while.
Changing Drying Time
1.
Power on while pressing and holding the Select button for 5 seconds. This will enter the
advanced settings mode.
2.
Press the Select button to select Parameter. Press Select button to enter the menu.
Highlight the program you want to change. Press Select button to move to the drying
time. Use the up/down buttons to change the drying time. Press the Select button to save
and return to the earlier menu. It is not recommended to change the default holding time.
