Configuring an FTP connection
Operators manual
37
FDS 400-301
Figure 26.0 FTP type menus
Figure 27.0 Login, password, remote path and FTP test
5.3 Testing an FTP
server from the HHMPI
To test an FTP connection, from the
FTP Servers
menu, press
down
until you reach the
FTP server name you want to test, and then press
right
. Then press
down
until you reach
the
FTP Test
command, and then press
right
. See
Figure 27.0, ”Login, password, remote
path and FTP test”, on page 37
.
5.4 Setting up an FTP
connection from the
web interface
You can configure the HHMPI through the web interface in any web-browser. Using the
web interface is the easiest way to configure the HHMPI.
To access the HHMPI web interface:
1.
Connect the HHMPI to the local area network (LAN) router or switch which will allo-
cate a unique IP address.
2.
From the
Main
menu, press
down
until you reach the
Network Operations
com-
mand, and then press
right
. Then press
down
until you reach the
View Wired
Address
command, and then press
right
.
If the HHMPI is assigned an IP address it will now be displayed, if no link is detected
No Link Detected
will be displayed.
3.
Record the IP address. See
Figure 28.0, ”Viewing the wired IP address”, on page 38
▼▲
Main Menu > Network Operations > View Wired Address