Three-way dumper
Use and operation
Fliegl Agrartechnik GmbH, 84453 Mühldorf am Inn, Germany
52 of 81
7.2.5 Tipping linchpins
The three-way dumper is equipped with two tipping linchpins, which prevent
accidental diagonal insertion
-
The tipping linchpins must be inserted in the side of
the tipper before the tipping operation
.
-
Accidentally inserting the bolts diagonally is prevented
with correct guide plates.
-
The tipping linchpins are to be secured with the spring
inserts, which are fitted on the link chains within the
guide plate.
Fig. 38: Rear tip bearing
7.2.6 Tipping processes
-
The two linchpins must always be inserted on the desired tipping side. Once the
plug-in coupling has been connected to the towing vehicle with at least 180 bar
and a sufficient amount of oil is present, the tipping process can be started. When
tipping, the tipper must be securely connected to the towing vehicle.
-
The tipping process can also be started with the hand pump (optional equipment).
-
When tipping, particularly to the rear, the trailer must be resting on a weight-
bearing, horizontal surface.
-
Be careful with loads that do not slide easily.
-
Carefully lock/unlock the tipper storage area.
-
No persons must be in the danger area during the tipping process.
-
Once tipping has been completed, always lower the loading surface completely.
Do not leave unattended when raised.
Rear tip bearing
Guide plate
Spring cotter pin
Tipping linchpin
