Three-way dumper
Service and maintenance
Fliegl Agrartechnik GmbH, 84453 Mühldorf am Inn, Germany
61 of 81
9.4 Operational maintenance
9.4.1 General instructions for maintenance
Operational maintenance helps to ensure trouble-free and efficient use of the machine. Operating
personnel can perform this work after receiving appropriate instruction.
Maintenance task
Interval
Dai
ly
50
o
pe
r. h
ou
rs
10
0
op
er.
ho
urs
A
s
ne
e
de
d
Chassis
Check tyre pressures
x
Check wheel nuts to ensure correct tightening torque
1)
x
Empty the compressed air reservoir
x
Check the wear on brake linings
x
Check the actuating travel of the brake cylinder and adjust as necessary*
x
Check the brake system and parking brake for correct function
x
Check the ALB and tensioning chain to ensure they are securely fastened and
undamaged
x
Check the entire compressed air system for function, leaks and secure fastening
x
Clean the line filters of the brake hoses
x
Check the freedom of movement of the wheel bearings
x
Lubricate all lubrication points on the trailer
x
Check all screw connections on the chassis and attachment as well as the
mounting points of the overrun brake mechanism to ensure they are securely
fastened
x
Structure
Check the swing-mounted side panel/rear panel lock
x
Lighting equipment on the tipper, check function
x
Check the hydraulic system for leaks
x
*
Every time the brake linings are replaced
.
General instructions:
-
For commercial vehicles, check the screw connections after the first 10 operating hours
-
Retighten all loose screw connections as necessary
-
W = workshop task
-
Or weekly
-
Or quarterly
-
Replace hydraulic hoses every 6 years
Some of the above tasks depend greatly on the type of use and the ambient
conditions.
The cycles indicated above are the minimum requirement. Different maintenance
cycles may be needed in individual cases.