FW1178 User’s Manual
M4049-02
7
Seyeon Tech Co., Ltd
Audio Input(MIC)
Input Impedence : 4 KOhm
Pantom Power : 3.3 Volt
Gain : 20 dB
Jack : 3.5mm Mono
Audio Output(SPK)
Output Impedence : 160 Ohm
Output Power : 50 mWatt
Output Voltage : Peek To Peek 1 Volte
Jack : 3.5mm Stereo
Power Over Ethernet
None
Serial Interface
Two serial ports for console, serial input/output device, PTZ
COM Port is RS-232,
Max Baudrate : 115200 bit/s
Security features
Multi user level protection for amera access
PTZ, Alarm I/O
Advanced Service
Up to 5.6M memory for Pre/Post alarm buffer
E-Mail, FTP, IP notification, Alarm Notification to e-mail
CGI Call by event or schedule
Built-in Motion detections
Accuracy : 12x12=144 blocks
Motion Sensitivity : -100 ~ 100 : 100 is hypersensitive
PTZ & UART Control
Support
Built-in PTZ device is controled through AUX
UART control X10 device
Dial in/out via PSTN or GSM modem
Management
Configurable by serial, web or telnet
Remote system update via telnet, FTP OR web browser
Developer support
Provides HTTP CGI API
ActiveX control development kit
PWR Supply
Transformer
Input : 100~240VAC, 1A
Output : AC 24 Volt, 3A
PWR Consumption
AC 12Volt 1.0A
Operating Environment
Temperature : 32° ~ 122°F (0° ~ 50°C)
Humidity : 20 ~ 80% RH(non-condensing)
Miscellaneous
Freely downloadable NDVR Software
Work with FW-Manager( NDVR S/W)
Dynamic IP support through IPCCTVDNS
Simultaneous users
Live-cast for up to 16 clients
Installation, management
and maintenance
Installation CD and web-based configuration
Firmware upgrades over HTTP or FTP , firmware available at www.flexwatch.com
Video access from Web
browser
Video access from Web browser
Minimum Web browsing
requirements
Pentium 4, 2 GHz, 2GB(RAM) or higher
Video Card: 256MB RAM, 1024x768 resolution or higher
100Mbps Network Adaptor or faster
Windows XP Pro or later
Internet Explorer 6.x or later
