FW1170 User’s Manual
M4046-01
6
Seyeon Tech Co., Ltd
1.3. Technical Specification
FW1170-VO
Hardware
32bit Embedded CPU
NAND Flash 128Mbytes/DDR2: 128Mbytes
Linux version 2.6.xx operating system
Battery backed up real-time clock
Image sensor
1/4” optical format CMOS
Sensitivity : 1500 mV/lux.sec
MAX Active pixel resolution: 652x488
[Detail]
S/N ratio: 46dB
White Balance: AWB
Lens
4.3mm F.2.0 lens
Minimum illumination
Color: 0.5 Lux (F2.0), B/W: 0.01 Lux(F2.0)
Video related special
functions
Backlight (OFF/LOW/MIDDLE/HIGH)
AGC (OFF/LOW/MIDDLE/HIGH)
Lens (MANUAL/DC)
Shutter (ESC/MANUAL/FlickerLess)
White Balance (ATW/AWC/MANUAL)
DNR
Video compression
Motion JPEG
H.264
Resolution
VGA(640x480), CIF(320x240), QCIF(160x112)
Frame rate
(each channel)
Motion JPEG : Up to 30/25 fps @VGA (Secondary Stream at QCIF)
H.264 : Up to 30/25 fps @VGA (Primary Stream at QCIF)
Video Streaming
Motion JPEG and H.264 Dual Streaming (Simultaneously)
Controllable frame rate and bandwidth
Video Standards
ONVIF
PSIA
Image setting
Compression levels : 6 (Motion-JPEG, H.264)
Color : color, black & white
LAN interface
10/100BaseT Ethernet auto sensing
IEEE 802.3af Built-in POE (optional)
Alarm I/O Interface
1 Photo-coupled input and 1 Relay output
Audio Input(MIC)
Built-in MIC
Audio Output(SPK)
Output Impedence : 16 Ohm
Output Power : 62 mWatt
Jack : 2.6mm Mono
Power Over Ethernet
Exterior PoE
Security features
Multi user level protection for camera access
Advanced Service
Up to 5.6M memory for Pre/Post alarm buffer
E-Mail, FTP, IP notification, Alarm Notification to e-mail
CGI Call by event or schedule
