FW3471 User’s Manual
M4068-00
45
Seyeon Tech Co., Ltd
11.4. Factory Default
Whenever it is required to restore the configuration of Camera setup to factory default condition, you can
do it here. Network configuration is not affected by this action.
Click
“Factory Default”
on Utilities menu. A confirmation screen will be displayed as shown Click
“Factory Default”
button, otherwise click
“Back”
button to cancel it. The second confirmation screen will
appear. Click
“OK”
button to restore the factory default condition right away. If you click
“Cancel”
, web
browser will go back to the previous screen without any change made.
11.5. System Update
FlexWATCH
™
Server’s system program and data are stored in Flash memory, and it consists of Kernel
Image, RAM Disk Image, System Image, and Web Image. In order to update the system of the server, you
should have proper image files ready in your PC.
Click
“System Update”
on Utilities menu, then the following window will be displayed. From the Start
buttons displayed, choose the one that meets your needs.
